Skip to content

FIREWALL

In FIREWALL, you can set up firewall rules like port forwarding, open port and DMZ.

firewall page

Port Forwards

Port Forwarding allows remote computers to connect to a specific computer or service behind the firewall in the LAN (such as web servers, FTP servers, etc).

To set up port forwarding, click Port Forwardsand input the required parameters or click Add a New One.

Port Forwards

Name: The name of the rule.

Protocol: The protocol used, you can choose TCP, UDP, or both TCP and UDP.

Internal IP: The IP address assigned by the router to the device which needs to be accessed remotely.

External Zone: The options for external zone are wan, guestZone, wireguard.

  • wan is for you want a service can be access in the WAN zone. E.g., a web server is running on a LAN device in your home, it can only access when you at home, but you want it to be accessable outside your home, then you can set the external zone as wan. You can access it via wan_ip:external_port. Note: Access outside your home need public IP.

  • guestZone is for you want a service can be access by a device connect to the guest Wi-Fi. E.g., a web server is running on a LAN device in your home, it can only access when your device in the LAN. However, the guest LAN is isolated from the default LAN, but you want the web serve can be accessable in guest LAN, then you can set the external zone as guestZone. You can access it via wan_ip:external_port.

  • wireguard, when the router is running WireGuard server, there will has the wireguard option. E.g., a web server is running on a LAN device in your home. When you connect in through your router's WireGuard Server configuration, by default you will not be able to access the web server on the intranet. To make it accessable, set the external zone as wireguard. You can access it via wan_ip:external_port.

External Ports: The numbers of external ports. You can enter a specific port number or a range of service ports (E.g 100-300).

Internal Ports: The internal port number of the device. You can enter a specific port number. Leave it blank if it is same as the external port.

Status: Activate of Deactivate the rule.

Open Ports on Router

The router's services, such as web, FTP and so on, require their respective ports to be opened on the router in order to be publicly reachable.

To open a port, click Open Ports on Router and input the required parameters or click Add a New One.

Port Forwards

Name: The name of the rule which can be specified by the user.

Port: The port number that you want to open.

Protocol: The protocol used, you can choose TCP, UDP, or both TCP and UDP.

Status: Activate of Deactivate the rule.

DMZ

DMZ allows you to expose one computer to the Internet, so that all the inbounds packets will be redirected to the computer you set.

Click DMZ and enable Open DMZ. Input the internal IP address (E.g. 192.168.8.100) of your device which is going to receive all the inbound packets.

Port Forwards

Back to top