GL-AR150 Series
AR150 Series includes AR150, AR150-Ext, AR150-PoE and AR150-Ext-PoE.
Hardware Specification
| Model | GL-AR150 |
|---|---|
| CPU | Atheros 9331 400MHz |
| Memory | DDRII 64MB |
| Storage | 16MB flash |
| Interfaces | 1 WAN, 1 LAN, 1 USB2.0, 1 Micro USB (power), 1 Reset Button, UART |
| Frequency | 2.4GHz |
| Transmission Rate | 150Mbps |
| Max. Tx Power | 18dBm |
| Protocol | 802.11 b/g/n |
| External Drive Format Support | FAT32/NTFS/exFAT/EXT4/EXT3/EXT2 |
| Webcam Support | MJPEG, YUV (web cam not support any more from firmware v2.27) |
| DIY Features | UART, GPIO, 3.3V & 5V power port |
| External Antenna Support | Yes (optional) |
| PoE Module Support | Yes (optional) |
| Power Input | 5V/1A |
| Power Consumption | <1.5W |
| Dimension, Weight | 58mmX58mmX25mm, 39g |
PCB Pinout
RTC Setting
You can use a RTC (Real-time control) module in GL-AR150 mini router.
Install kernel modules
If you use our stock firmware, you can just install using opkg
opkg update
opkg install kmod-i2c-gpio-custom
opkg install kmod-rtc-sd2068
If you want to compile your own firmware, choose these packages:
Kernel modules ---> I2C support ---> kmod-i2c-gpio-custom
Kernel modules ---> Other modules ---> kmod-rtc-sd2068
Software
The GPIO used for RTC is below:
SDA <--> GPIO1
SCL <--> GPIO17
Now you need in insert kernel modules and connect to the module
insmod i2c-gpio-custom.ko bus0=0,1,17
echo sd2068 0x32 > /sys/bus/i2c/devices/i2c-0/new_device
To read the time from RTC module
hwclock -r
To sync the RTC module's time to mini router
hwclock -s
To write mini router's time to RTC module
hwclock -w
PoE Connection
We have a specific PoE module for GL-AR150 mini routers. You can find it in the PoE version of AR150 router.
You can only apply one power supply method at one time, either via PoE (Power over Ethernet) or micro USB Power. The compatible passive or active PoE injector should be 48V 802.3af/at.
PoE only works on the WAN Port only
PoE Setup Sample:
The following PoE injector is widely availabe in the market and it is very affordable. You can put you Ineternet cable in the Data In port then connect the Data & Power Out port to AR150-PoE's WAN port.
For PoE Version Only
