GL-MT300N-V2
The best selling mini router.
MT300N-V2 is an upgraded version of MT300N. The differences include:
- RAM is doubled to 128MB
- WiFi performance is improved using MTK proprietary driver. This driver doesn't support monitoring mode. But it support layer 2 bridging for all kinds of AP, which is not the case of opensource drivers.
- Opensource wifi drivers also work but it has some bugs and cause kernel panic. This problem was never solved by the community.
- No PoE options.
Hardware Specification
| Model | GL-MT300N-V2 |
|---|---|
| CPU | MTK 7628NN 580MHz |
| Memory | DDRII 128MB |
| Storage | 16MB Nor Flash |
| Interfaces | 1 WAN, 1LAN 1 USB2.0, 1 Micro USB (power), 1 Reset Button |
| Frequency | 2.4GHz |
| Transmission Rate | 300Mbps |
| Max. Tx Power | 20dBm |
| Protocol | 802.11 b/g/n |
| External Drive Format Support | FAT32/NTFS/exFAT/EXT4/EXT3/EXT2 |
| Webcam Support | MJPEG, YUV (not supported from firmware v2.27) |
| DIY Features | UART, 4GPIOs, 3.3V & 5V power port |
| External Antenna Support | No |
| PoE Module Support | No |
| Power Input | 5V/1A |
| Power Consumption | <2.75W |
| Dimension, Weight | 58mmX58mmX25mm, 39g |
PCB Pinout
The pins on the left side can be actually used for Ethernet port or EMMC. They cannot be used as GPIO.
