How to Connect GL-iNet Router to a Starlink Dish

Topology

1. Connect your Starlink Router power to the Starlink Dish.

2. Connect Starlink LAN port to GLiNet Router WAN port.

3. Setup GLiNet Router by connecting it's LAN or WiFi. First time setup

If you are using GL-XE3000(Puli AX), GL-X3000(Spitz AX), GL-MT3000(Beryl AX), GL-MT2500A(Brume2), GL-SFT1200(Opal), GL-MT1300(Beryl), please go to Web Admin Panel >NETWORK>Network Acceleration, then disable it

4. Open Starlink App, go to setting, enable the Bypass mode.

5. Use Starlink App with GLiNet Router network

Go to System>Advance>Luci>Network>Static Routes set a static route, then Save & Apply