How to add Brume 2 into GLiNet Mobile App?

You can add your Brume 2 (GL-MT2500/GL-MT2500A) into the GLiNet Mobile App even if it has no Wi-Fi feature. You can either set it as the main router or the secondary router.

The following methods are also applicable to Brume (GL-MV1000).

Brume 2 as the Secondary Router

Topology

Here we have Slate AX (GL-AXT1800) as the main router and Brume 2 (GL-MT2500) as the secondary router.

1. Log in to your Brume 2 web Admin Panel, go to SYSTEM -> Security -> Open Ports on Router, open port 80.

   

   For some older models, go to Firewall -> Open Ports on Router, open port 80.

   

2. Log in to main router and mark down the WAN IP of Brume 2

   

3. Connect a phone to the Wi-Fi of your main router.

   

4. Launch the glinet App and click Add New Device.

   

5. Then click Initialized Devices.

   

6. Input the WAN IP you found in the main router before.

   

7. Input the login password of Brume 2.

   

   Now your Brume 2 will show up in the glinet mobile App.

   

Brume 2 as the Main Router

Topology

1. Log in to your secondary router, which is GL-AXT1800 in this case, and set it in Access Point mode.

   

2. Connect a phone to the Wi-Fi of your secondary router.

   

3. Launch the glinet App and click Add New Device.

   

4. Select your main router.

   

5. Click Next

   

6. If you are still connecting to the secondary router's Wi-Fi, just wait. If not, re-connect to the secondary router's Wi-Fi.

   

7. Input the login password of Brume 2.

   

   Now your Brume 2 will show up in the glinet mobile App.

   

---

Still have questions? Visit our Community Forum or Contact us.