Getting Started with GL.iNet Brume
1. Power on
Plug the USB Type c power cable into the power port of the router. Make sure you are using a standard 5V/2A power adapter. Otherwise it may cause malfunction.
Note: Hot plug for TF card is not supported. If you want to use TF card, please insert before powering on the router.
You can only connect to the router via Ethernet cable.
Note: This step only connects your devices to the local area network (LAN) of the router. You cannot access the Internet currently. In order to connect to the Internet, please finish the setup procedures below and then follow Internet to set up an Internet connection.
Connect via LAN
Connect your device to the LAN port of the router via Ethernet cable.
3. Access the Web Admin Panel
Open a web browser (we recommend Chrome, firefox) and visit http://192.168.8.1. You will be directed to the initial setup of the web Admin Panel.
1) Language Setting
You need to choose the display language of the Admin Panel. Currently, our routers support English, 简体中文, 繁體中文, Deutsch, Français, Español, Italiano and 日本語.
2) Admin Password Setting
There is no default password for the Admin Panel. You have to set your own password, which must be at least 5 characters long. Then, click
Submit to proceed.
Note: This password is for this web Admin Panel and the embedded Linux system. It will not change your Wi-Fi password.
3) Admin Panel
After the initial setup, you will enter the web Admin Panel of the router. It allows you to check the status and manage the settings of the router.