Getting Started with GL.iNet Brume¶
1. Power on¶
Plug the USB Type-C power cable into the power port of the router. Make sure you are using a standard 5V/3A power adapter. Otherwise it may cause malfunction.
Note: Hot plugging for TF card is not supported. If you want to use TF card, please insert before powering on the router.
You can only connect to the router via Ethernet cable or USB type-C cable.
Note: This step only connects your devices to the local area network (LAN) of the router. You cannot access the Internet currently. In order to connect to the Internet, please finish the setup procedures below and then follow Internet to set up an Internet connection.
Connect via LAN¶
Connect your device to the LAN port of the router via Ethernet cable.
Connect via USB Type-C Cable¶
Connect your computer to the power port of the router via USB Type-C cable. Keeps your computer connect to the internet and waits for several minutes, it will install the driver automatically.
It supports Windows 10, Windows 7, Mac OS, Ubuntu.
Certain Windows systems don't recognize the Brume as a network device or fail to find the correct driver. Use this driver for such cases: mod-duo-rndis.zip
Below follows a tutorial on how to install it. If your system reports the driver as missing, make windows look for drivers and skip to step 4).
Press the windows key and 'R' at the same time to get the 'Run' dialog. Type "devmgmt.msc" and press enter. (This will open the Device Manager)
Find the MOD Duo device. It either appears as 'Duo Ethernet' under 'Unknown devices' or as a USB Serial device. If you have 'Duo Ethernet' as unknown device, select it. If not, expand the 'Ports (COM & LPT)' category and select 'USB Serial Device'.
Right click on the selected item and select 'Update Driver Software...'.
Select 'Browse my computer for driver software'
Click the 'Browse' button and select the folder where you extracted the contents of the mod-duo-rndis.zip file, then click 'Next'.
Wait for Windows to finish installing the driver.
That's it! The driver is installed. :)
If everything is working correctly, the Duo will appear as 'USB Ethernet/RNDIS Gadget' under 'Network adapters'
3. Access the web Admin Panel¶
Open a web browser (we recommend Chrome, firefox) and visit http://192.168.8.1. You will be directed to the initial setup of the web Admin Panel.
1) Language Setting¶
You need to choose the display language of the Admin Panel. Currently, our routers support English, 简体中文, 繁體中文, Deutsch, Français, Español, Italiano 日本語, 한국어 and Русский.
2) Admin Password Setting¶
There is no default password for the Admin Panel. You have to set your own password, which must be at least 5 characters. Then, click
Submit to proceed.
3) Admin Panel¶
After the initial setup, you will enter the web Admin Panel of the router. It allows you to check the status and manage the settings of the router.