GL-M2 User Guide

Hardware Info

GL-M2 is for DIY enthusiasts who would like to build their own routers and modems. With GL-M2's 5G Module and 5G antennas, it provides a quality 5G cellular network.

GL-M2 specification

---

Package Contents

Package Contents:

• 1 x GL-M2 Development Board
• 4 x 5G Antennas
• 4 x IPEX Connectors
• 2 x Screws
• 1 x DC Power Adapter
• 1 x Universal Plug Adapter (US, EU, UK & AU)
• 1 x 5G Module (Optional)
• 1 x Type-C Cable

---

First-time Setup

1. Install the module and the antenna.

   Use an RF conversion extension cable or an SMA antenna connection cable to connect the antenna to the IPEX interface on the module.

   

2. Insert the Nano SIM card.

   

3. Power up.

   Connect to a DC power supply and use a Type-C to USB 3.0 data cable to connect to the router or other device.

   

Note:

• During use, it is necessary to connect to a DC power supply to provide a stable power source.

• When the power indicator light is lit in red, it indicates a functioning power supply.

---

Connect GL-M2 to GL.iNet Routers

GL-M2 (with 5G Module RM520N-GL installed) is compatible with the following devices:

• Slate 7 (GL-BE3600) : Firmware version 4.7.1 or above.

• Flint 2 (GL-MT6000) : Firmware version 4.5.1 or above.

• Flint (GL-AX1800): Firmware version 4.2.3 or above

• Slate AX (GL-AXT1800), Beryl AX (GL-MT3000) & Brume 2 (GL-MT2500) : Firmware version 4.2.1 and above.

Note

The above compatible router list is obtained by using a 5G Module RM520N-GL. Compatibility with other modules is not guaranteed.

1. Connect M2 to a GL.iNet router, and use an ethernet cable to connect the GL.iNet router to a computer. Visit http://192.168.8.1 on a browser to enter the web Admin Panel.

   

2. Click on Auto Setup under the INTERNET section to connect to the Internet.

   

3. The network connection has been made successfully.