LAN¶

On the left side of web Admin Panel -> NETWORK -> LAN

LAN¶

The LAN is the network if your devices connect to the Main WiFi or connect via an ethernet cable.

The Router IP Address is 192.168.8.1 by default. You can change it if it conflicts with your network.

lan simple set

DHCP Server¶

The DHCP Server is enabled by default.The DHCP server automatically assigning IP addresses and other communication parameters to each client devices.If the DHCP server is disabled, you will have to configure them manually for each client. How to manually configure static ip?

You can change the starting and ending IP addresses to suit your needs, for example, if the size of the network expands or shrinks, if there are IP address conflicts in the network, or if the subnet mask or IP address range has changed.

dhcp_simple_set

Advanced¶

You can click Advanced for more manually settings.

lan page, private network advanced

Address Reservation¶

When you specify a reserved IP address for a client within the LAN, the client always receives the same IP address each time it accesses the router’s DHCP server. You can assign reserved IP addresses to computers or servers that require permanent IP settings.

Note: Configured clients have to reconnect the router to activate.

Click Add to reserve an IP.

lan page, Address Reservation

Select the MAC, it will fill the IP automatically after select MAC. Give it a descriptive name. Then click Submit.

lan page, Address Reservation, add a new reservation entry

After adding a new IP address reservation.

lan page, added reserve ip