Skip to content


1) 2.4G WiFi

In WIRELESS, you can check the current status and change the settings of the wireless network created by the router. The wireless network can be turned on or off by switching the ON/OFF button.


Wi-Fi Name (SSID): The name of the Wi-Fi. It is not suggested to use unicode characters such as Chinese.

Wireless Security: Wireless encryption method.

Wi-Fi Key: The password of the Wi-Fi, which must be at least 6 characters long. We suggest you to change it when you receive the router.

SSID visibility: Whether to hide the SSID or not.

Wi-Fi Mode: You could select 802.11b/g/n or 802.11g or 802.11b.

Bandwidth: You could select 20/40MHz or 40MHz or 20MHz.

Channel: The router will not choose the best channel itself. You need to choose a channel manually. If your router is used as a Wi-Fi repeater, the channel will be fixed according to the connected wireless network.

wifi modify

Click Modify to change the settings of the wireless network.

2) Dongle

Starting from firmware version 3.100, users could add Wi-Fi to MV1000W.

Please download the latest firmware from the links here : - Firmware

Here is a list of supported dongles that we had tested before.

Driver Dongle Tested Tested by Comments*
RTL8811AU/RTL8821AU AWUS036ACS Yes GL.iNet
RTL8812AU AWUS036AC Yes GL.iNet

When you insert the dongle, you will see the dongle under "Wireless" and then you could set up as Access Point or repeater.



Click Modify to change the settings of the wireless network. wifi modify