File Sharing on GL.iNet Routers¶
You can use GL.iNet routers with external storage device such as USB stick, MicroSD card, etc, and some models have big internal storage, thus the contents can be shared among all your connected clients. You can easily read or modify its contents.
Usually models with USB ports or TF slots or have big internal storage are supported for file sharing.
Note: The power consumption of USB hard drive is quite high. You should use it with an external power supply. Otherwise, it may cause malfunction.
|Router Model||USB Stick||USB Hard Drive||MicroSD Card||Internal Storage|
|GL-MT3000 (Beryl AX)||√||√||-||-|
|GL-AXT1800 (Slate AX)||√||√||√||-|
|GL-A1300 (Slate Plus)||√||√||-||-|
|GL-MT2500/GL-MT2500A (Brume 2)||√||√||-||-|
On the left side of web Admin Panel -> APPLICATIONS -> File Sharing -> File Sharing
The file sharing packages may not installed. Click
Install to continue.
After installed, it will share via LAN by default.
Share via LAN: Share the contents of the external storage device with all connected clients.
Share via WAN: The contents of the external storage device can be accessed from the WAN.
Writable: The contents of the external storage device can be edited. For writable, it recommend using NTFS or EXT4 file systems.
Access the storage device¶
You can access the contents of the external storage device from your computer or smart phone. Please check the following guidance for the using of file sharing among different operating systems.
You may be able to access the share via
smb://192.168.8.1/ or with
GL-modelXXX instead of
\\GL-AR750S\) in your system's file explorer. Since sharing is enabled to the LAN by default (this includes both wired AND wireless clients) and maps a "bad user" to Guest, then even if they don't supply a username and password or an invalid one, ANYONE connected to your router can access the files in the share in Read-Only mode. If you enable Writable mode this applies to both Guests AND the default
root user. If you enable write access, anybody can create or delete files and folders, if you disable write access, not even the
root user can delete them via SMB (they can through the CLI though). We can hope that in a future revision there is a simple user management and that a named user (or
root) can read and/or write while Guests are limited by the
Writable or a
Public Write flag on a share (and having multiple shares would be great as well).
Method 1: Samba 2.0 (SMB2.0) Support:¶
We suggest Samba 2.0 support for Windows 10 users.
Due to the security vulunerabilitiy of the Samba1.0 protocol, Samba1.0 is not enabled by default in Window 10. You may modify the router Samba configuration.
1). SSH into your router, you can gain control of both the router and the network that the rotuer is controlling.
2). Modify the Samba configuration file, type the following command:
sed -i 's/security = share/security = user/' /etc/samba/smb.conf.template
3). Restart the Samba service, type the following command:
4). Open 'This PC' and type
\\your router IP Address, such as
5). You can view files in your USB flash drive through GL.iNet router now.
Method 2: Samba 1.0 (SMB1.0) Support:¶
1) Your network must be Home/Private. Otherwise you may not be able to see your router in Network.
3.0 firmware supports SMB2, and if you need SMB3, use WinSCP to router, edit
Change the "max protocol = SMB2" to
"min protocol = SMB1"
"max protocol = SMB3", then save and exit WinSCP.
If you are using Windows 10, you also need to enable SMB 1.0.
- Windows 7
Go to Control panel -> Network and Internet -> Network and Sharing Center. Find if your active network is Home network. If not, click it and change it to Home network.
- Windows 10
Change your network to private by this tutorial.
Go to Control Panel -> Programs and Features -> Turn Windows features on or off -> Find SMB 1.0/CIFS file sharing support, check all SMB1 related items, click apply and restart your computer.
2) Open a Windows explorer, you can find Network in the folder directory. Double click your router to access its contents.
1) Open Finder, Menu -> Go -> Connect to Server...
smb://192.168.8.1, you need to change this if your router IP address is not 192.168.8.1
3) Click Connect.
4) Input username and password, they are the same when you login web Admin Panel.
5) Then Finder will display files of USB disk.
1) Go to System Preferences -> Sharing -> File sharing. Click
Options and then enable SMB.
2) Open Finder. You should be able to find your router under Shared.
The next section describes how to connect to Samba using the Documents app.
Click the plus button in the lower right corner.
Click Add Connection.
Click Windows SMB.
The Title is for a name of this connection. URL is the access link, default is
smb://192.168.8.1. leave Login and Password empty.
Click Done button to complete this setup.
If you are using Linux you are probably comfortable with connecting to servers, and how to do this can vary greatly from distribution to distribution and largely depends on your window manager/display environment. Most systems come with Gnome and it is the default on the very popular Ubuntu distribution, so we'll give an example using the Files tool (also called Nautilus). If you open the app you should have a "Connect to server" option, there you can enter either the
ChromeOS or ChromiumOS (Neverware CloudReady and others)¶
There is a built in Samba/SMB client in the Files app, and they have deprecated the previous separate plugin/service that was a GoogleLabs experiment.
In the Files app if you go to the 3 dot menu at the top right and "Add new service" you then select "SMB File Share" from the list and it will give you the dialog to fill out with the server name and some other details, but only the server name/IP and share name are required (unless you modify the smb.conf on your router to better control access to certain paths, you can use SSH or Luci + webmin to manage this).
The default share name appears to be
GL-Samba so a connection string might be
\\192.168.8.1\GL-Samba if your USB or microSD is properly recognized.
If you are having trouble getting connected or don't know the share name you can check with
smbclient which you can install in the Terminal app, which is the interface for Crostini (aka Linux apps in most of the Settings menus).
sudo apt update && sudo apt install smbclient # Answer 'y' to the prompt and hit Enter smbclient -N -L 192.168.8.1
Most Android devices have file manager tool which maybe can be used to access the files on Network Devices using SMB. Or you can search file explorer app which support SMB on Google Play.
Here I'm going to use Solid Explorer File Manager as an example:
1) Open the app.
2) Click the
Plus sign button on the right bottom of page, then choose
New cloud connection.
LAN / SMB.
4) Choose the Server, the IP address of your device.