Mesh
Mesh is available on B1300 and S1300 after firmware v3.022.
You need at least two of mesh supported routers to establish mesh network.
Mesh network setup steps
1) Power on Main Nod
Select one B1300/S1300 as main nod to make Initial Setup , then make Cable Connection between WAN port of Main Nod and LAN port of up level router/modem.
2) Power on Sub Nods
Power on to all sub nods without any ethernet cable connection.
3) Start Pairing Mode on Main Nod
Hold the Mesh Button for 5 seconds and release it until the Mesh Light blinking first accelerate. The main nod is on pairing mode.
4) Start Pairing Mode on Sub Nods
Follow step 3) to start pairing mode on sub nods, initial setup is unnecessary.
5) Establish Mesh Network
The mesh network starts working when Mesh LED Lights of all nods are solid.
Mesh network established status
The Mesh icon will replace Wireless after mesh network established. Repeater function will not avalible in mesh mode.
All SSIDs including 2.4Ghz and 5Ghz become one and same password.
You can find devices MAC address, connected nods and connection methods in mesh clients.
CLIENTS management in mesh
You can manage all devices connected to mesh network in CLIENTS.
Stop Mesh Network
When you want to stop the mesh network, hold the Mesh Button for 5 seconds and release it until the Mesh Light blinking 2nd accelerate.