How to access the KVM remotely via GLKVM app?¶

Before you begin, please ensure the controlled device has been connected to the GL.iNet KVM correctly, and the KVM is connected to a stable network.

Follow the steps below to access your KVM and the controlled device remotely via GLKVM app.

Install and log in¶

Install the GLKVM App on your controlling device.
Open the GLKVM app and log in with your GL.iNet account.

If you don't have a GL.iNet account, sign up for one and then log in.

After login, the page will display as follows. Click Add Device.

There are three ways to bind your KVM: Auto Discover, S/N Code, and Dynamic Binding Code.

add device

This needs to be done within the local network. Please ensure that your KVM and the controlling device are on the same LAN.

Click Auto Discover. It will start searching for available KVM devices automatically.
Locate your KVM and enter its Device ID to bind it to your account.

This method applies to scenarios where your KVM is not detected, or is not on the same LAN, but you have its serial number (S/N).

Click S/N Code.
In the pop-up window, name your device and enter its S/N, which is printed on your KVM device's label bottom.

Please upgrade your KVM firmware to v1.7 before using this feature.

This needs to be done within the local network. Please ensure that your KVM and the controlling device are on the same LAN.

Log in to your KVM locally using domain or IP address. Click here for details.
After login, go to Cloud Service in the upper-right corner, and click Bind With Code.
It will generate an 8-digit dynamic code randomly for device binding, valid for 60 seconds. Click the code to copy it.
Back to the GLKVM app, enter the dynamic binding code and click Bind.